Membrane Bio-Reactor Systems (MBR)


    The limited water resources reveal the need to treat and use wastewater. With the development of technology, it becomes possible to treat domestic and industrial wastewater with good quality. Membrane bio-reactor system is developed as a result of the fact that the membrane application used in wastewater treatment is very costly and conventional systems and facilities require very large areas for treatment. These systems, also called MBRs, not only purify high quality water, but also take up less space than conventional plants. You can find detailed information about MBR systems on our website.

    What are Membrane Bio-Reactor Systems?

     Getting the water we all need is getting harder day by day. Limited water resources, more and more costly drinking water, wastewater treatment plants and increasing environmental pollution require new ways to reach healthy water. It is a technology that increases efficiency in wastewater treatment by combining membrane bio-reactor systems, membrane filtration system and biological reactors. In this technology, which has been used more frequently in recent years, the water obtained by biological treatment is then filtered by a membrane filtration system and the resulting water is of higher quality. Considering the large area required for water treatment systems, it is frequently preferred in places where the land cost is high. You can always contact us for more detailed information.
     H3: How Membrane Bio-Reactor Systems Work? (There is no content written for this title because it is from the same title below)

    Membrane Bio-Reactor System Features

     In this system, the quality of the membrane material and the pore sizes are important criteria for the quality of the system. Membranes are mechanically robust and also resistant to both high temperature and chemicals. The most important feature of this system is that the membranes have the ability to clean themselves. Some systems used in activated sludge systems are not needed because the quality of the water obtained with membrane bio-reactor systems is quite high. Sludge production and area requirement are less. The high porosity of the surfaces provides an important advantage. MBR technology provides a practical solution for domestic and industrial wastewater treatment and is therefore highly preferred. You can review our website for information about the membrane bio-reactor system.

    Application Criteria of MBR Process

    The most commonly used membrane processes in water purification; microfiltration, ultrafiltration, nanofiltration and reverse osmosis. Microfiltration and ultrafiltration parts with polymeric or ceramic membranes are used in MBR systems. Particles filtered in microfiltration are in the range of 0.1 - 1 micrometer. Bacteria and suspended solids are separated from the water here. In the meantime, the pressure is low, so the amount of energy required is low. During ultrafiltration, small molecules and even all dissolved salts in the water are filtered out. One of the most important features of the MBR system is that the treatment in biomass water separation is done by physical filtration, not by the settling principle. For more detailed information on the subject, you can contact us and talk to our expert team.

    Where are Membrane Bio-Reactor Systems Used?

     MBR treatment systems can be used in many different areas. This technology, developed for the treatment of domestic and industrial wastewater, is used in the treatment of highly polluted water. Waste water can be treated with this system and irrigation water can be obtained. MBR systems can be used to recover wastewater in places where water consumption is high. In addition, membrane bio-reactor systems are the right choice at points where there is no necessary space for conventional systems and devices, or where the wastewater treatment plant becomes insufficient as a result of capacity increase. In addition to all these, if there are discharge limits in water basins, this system can be used again. MBR systems treat more wastewater in a smaller area than the conventional system, in a higher quality way. Previously, membranes were used for low flow systems due to the high costs of both equipment and operation and maintenance of equipment, whereas today it is common for larger systems. The wastewater treated through the membrane bioreactor is also very suitable for reuse in industrial and commercial applications. For more information about the system, you can visit our website or contact us over the phone.

    How Membrane Bio-Reactor Systems Work?

     In this system, immersion type membrane filter works at negative pressure in the biological reactor, or filters operating at positive pressure are used outside of the biological treatment. Waste water is passed through a filter with pores of 0.2 micrometers, and all solid materials that may be found are separated. In this way, when the wastewater is treated, it contains almost no solids and organisms. By providing a continuous flow, the filtered solids are prevented from clinging to the surface and clogging the filter. If waste still accumulates on the membrane filter surface, these wastes are cleaned both physically and chemically by periodic backwashing and chemical cleaning. If you want to get more information about membrane bio-reactor systems that provide high treatment efficiency, you can contact us by phone.

    What are the Advantages of Membrane Bio-Reactor Systems?

     Membrane technology is used more and more frequently as time passes, due to the high quality treatment of waste water with high pollution and obtaining healthy effluent. Membrane bioreactor system; It is very advantageous in terms of its high efficiency in the separation of organic matter, its application to wastewater that is very difficult to treat, low sludge production, no need for disinfection due to the high quality of the treated water, loading speed and small area required for the system compared to conventional systems. In addition, the membrane bioreactor stands out with its continuous operation, portability and modular use. In these systems, nitrogen removal can also be done, higher nitrogen removal is made compared to conventional activated sludge systems. You can get detailed information by contacting us on any issue you wonder about the system, and you can find answers to the questions you have in mind.

    FREQUENTLY ASKED QUESTIONS Why Should MBR Systems Be Preferred?

     Due to the ever-increasing need for water, alternatives are needed to ensure continuity. MBR systems are an important option with their advantages in many aspects such as consuming less energy in the treatment of wastewater, high quality water treatment, small area coverage, and the fact that the treated water does not need an extra disinfection process.

    In Which Situations Can MBR Systems Be Used Industrially?

     Urban usage areas of membrane bio-reactor systems are parks, sports fields, highway sides, car wash facilities, etc. can be counted as Industrially, it can be used for purposes such as fire extinguishing, green field irrigation of facilities, boiler feed water

    Call Us Whatsapp
    Get An Offer
    I approve the User Data Protection Law.
    Get An Offer