Chlorine dosing systems are one of the preferred water purification methods for many years due to its permanent effect. Chlorine dosing, which is used in the permanent removal of harmful microorganisms such as bacteria, viruses and fungi in existing water, is one of the most common systems preferred for disinfection. This system, which is very economical due to its permanent effect, is preferred in many different areas, especially drinking water. It is preferred to oxidize substances such as nitrite, iron and manganese in water. Disinfection processes of water used not only in drinking water but also in industrial areas can be done with chlorine dosing units. Since the chlorine used in this system is one of the chemicals that provides sufficient disinfection on many organisms, it is transferred to the water by the dosage pump method. In this way, it is ensured that the existing water is disinfected permanently. This system, which is also economical due to its permanent effect, has 3 different working principles. It is produced in three systems as standard type dosing, ORP controlled dosing and flow controlled dosing. If you want to get detailed information about the systems, you can benefit from the information on our website and contact us on our phones.
What is Chlorine Dosage Disinfection Systems?
Chlorine dosage disinfection systems, which are preferred in cases of reducing suspended chemicals in water, are especially used to oxidize substances such as nitrite, iron and manganese in water. This system, which is suitable for use in many areas, operates on the basis of cleaning the water with the help of chlorine. Making this chlorine with a dosing system is one of its very important features. Chlorine is durable for a long time as it is a stable chemical. This durability also makes the system cost less. At the same time, the chlorine used is a chemical that is preferred not only for the protection of water but also for the protection of the tank, pipeline and all other equipment and to prevent microbacterial contamination. If you want to get detailed information about this system, you can contact us at our phone numbers.
How Do Chlorine Dosage Disinfection Systems Work?
Since chlorine is one of the stable chemicals, the lines through which the raw water passes are chlorinated at a certain rate, allowing the water to enter the tank with chlorine. Disinfection continues in the warehouse thanks to the chlorine it contains. Thanks to chlorine, it is ensured that the warehouse is constantly disinfected, and microbiological contamination in the water installations is prevented. When selecting the dosing pump to be used, the amount of water to be chlorinated and the pressure values of the pipeline to be chlorinated are taken into account. It is necessary to do the chlorine dosage on the pipeline going to the tank or at the entrance of the tank instead of making it directly to the entire water. The reason for this is that the water in contact with chlorine waits for a while and the disinfection process takes place during this period. If the water will be transferred to the tank with a submersible pump, the chlorine to be dosed should be determined by considering the pressure of the submersible pump and the capacity of the water. In cases where the amount of pressure is high, it is recommended to apply chlorine directly to the tank and to operate the dosing pump at low pressure. The reason for this is that this application prolongs the life of the pump. If the lime value of the water to be disinfected is high, it may cause clogging of the installed check valve systems, and operating at high pressure increases the risk of deterioration. Considering all these factors, a choice should be made and dosing pumps should be installed in the tank.
Types of Chlorine Dosing Systems
While chlorine dosing systems differ according to the working areas, they also vary according to the amount of water that needs to be chlorinated. The capacity, lime rate and source of the water to be chlorinated form the types of this system. There are three different chlorine dosing systems. At the beginning of these is the standard type dosing system. As the name suggests, it is used for manual chlorination. The other method is the ORP controlled dosing system. This system has a working principle that works automatically and dosing according to the amount of chemicals in the water. Finally, there is the flow-controlled dosing system. The feature of this system is that it is chlorinated according to the amount of running water. You can also call us and take advantage of our website to get detailed information about these systems, which are preferred according to the area used and the amount of water.
Standard Type Dosing Systems;
The standard type dosing system works with the principle of manually dosing the chlorine needed by the water. The dose of chlorine is adjusted with the stroke value on the pump installed in the tank, and there are many different fluids in this method, as in all other methods. This method, which can be preferred for dosing smaller amounts of liquids, is suitable for use in many different areas. If you want to get more information about standard type dosing or ask any questions you have in mind, we can give you the phone numbers on our website.